Industry News

Common Sense for Vehicle Air Conditioning Maintenance

1. Check the compressor drive belt: If the surface of the drive belt and the contact side of the pulley groove are shiny, and there is a "squeaking" noise when starting the air conditioner, it indicates that the drive belt is severely slipping, and the drive belt and pulley should be replaced. If the drive belt is too loose, it should be adjusted; otherwise, it may cause poor cooling performance of the air conditioning system.

2. Clean the condenser: A clean surface of the car condenser facilitates the dissipation of heat to the outside. Regularly cleaning the condenser surface can greatly improve the cooling effect of the air conditioning system. For this reason, the condenser should be cleaned frequently to prevent oil stains, dirt, and other debris from adhering to it. When cleaning, be careful not to knock over the condenser fins, and do not damage the pipes.

3. Inspect air conditioning system hoses and pipe joints: If any wear is found, handle it in a timely manner. For components with cracks, wrap the cracks with cloth, stop using the air conditioner, and send it for repair as soon as possible.

4. Check the air conditioning electrical circuit: Regularly inspect the circuit of the air conditioner to prevent the insulation layer of the wires from being worn out. When the fuse (commonly known as a fuse) of the air conditioning system is burned out, first find out the cause of the problem, and then replace the fuse and power on after handling it. Never short-circuit the fuse, otherwise, it may burn out the entire circuit and may also have adverse effects on other circuits in the car.

5. Regularly check the liquid level of the refrigerant in the air conditioning system: The glass sight glass is usually installed on the cover of the dryer. Run the engine and the air conditioning system, and observe the flow of refrigerant through the glass sight glass. If the air conditioner is working normally, you should see clear coolant flowing continuously through the sight glass, with occasional small bubbles when the temperature is high, and small bubbles can be seen when the air conditioning system is turned off.

6. Regularly clean the air filter: An air filter is usually installed at the air inlet of the evaporator. The air conditioning air filter should be cleaned regularly to prevent dust and debris in the car from adhering to the air filter, which would block air circulation and cause insufficient cooling capacity.

7. Clean the air conditioning outlets in a timely manner: The air conditioning outlets are the most easily overlooked part and also the dirtiest part that needs cleaning.

8. Maintain the air conditioning condenser in a timely manner: The main function of the air conditioning condenser is to exchange heat between air. Once the air conditioning condenser is dirty or damaged, you will feel that the cooling effect is very poor when using the air conditioner in summer.

9. Clean or replace the air conditioning filter in a timely manner: The filter of the car air conditioner is an important part for maintenance. If the air conditioning filter is clogged and not cleaned for a long time, it will lead to poor ventilation quality. Not cleaning or replacing it for a long time will only absorb a lot of harmful exhaust gas, and even produce toxic gases when heated in winter.

10. Check the refrigerant in a timely manner: Refrigerant, also known as coolant, refrigerating agent, or freon, is a medium substance used to complete energy conversion in various heat engines. These substances usually use reversible phase changes (such as gas-liquid phase changes) to increase power.

11. Avoid blindly adding refrigerant: When the air conditioner does not cool, blindly adding refrigerant is wrong. The correct approach is to first ask a professional maintenance technician to check the cause of the fault to avoid increasing the pressure in the system pipeline and poor heat dissipation of the air conditioner due to improper refrigerant addition.

12. Choose the appropriate lubricating oil: Lubricating oil is not necessarily the more expensive the better. You should choose the appropriate lubricating oil according to the vehicle model and season. For example, in summer, you can choose lubricating oil with higher viscosity at high temperatures.

13. Reasonably use the internal and external circulation of the air conditioner: Using internal circulation for a long time will cause the air in the car to become turbid and lack oxygen. You should alternately use internal circulation and external circulation modes to keep the air in the car fresh.

14. Correctly clean the condenser: The correct cleaning method is to first use compressed air to blow off dust and foreign objects from the inside out, and then rinse with a water pipe from the inside out.

15. Avoid water entering the air conditioning system: When washing the car, avoid letting water enter the air conditioning system to prevent damage to the service life of the air conditioner.

The above are some common sense and precautions about vehicle air conditioning maintenance. Regular professional air conditioning maintenance can not only improve the working efficiency of the air conditioner but also extend its service life.